Elegant Steel Entrance Door Collection

Jmr-2003
An entrance door with a sculptural raised pull handle and a satin metal face.

Jmr-2103
An entrance door that integrates mixed metal sections with a wood-grain panel.

Jmr-2110
An entrance door with a long horizontal statement pull across a plain metal face.

J-2008
A textured steel entrance door with an integrated architectural pull.

J-2215
A textured steel entrance door with a flush architectural lock system and no visible lever.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- Clear, Low-E, frosted or laminated
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Elegant Steel Entrance Door Collection FAQ
What does the three-panel splicing actually refer to?
The face is divided into three fields, and the divisions are made by profile rather than printed or etched onto one sheet. That means the proportion of the three panels is a drawing decision you can set — equal thirds, a deep base panel with two shorter fields above, or a wide centre field that carries the pull handle.
Can the three panels use different materials?
Yes. Wood transfer, metallic coating, aluminium panel and steel can be combined on one leaf, which is how the mixed-metal designs in this collection are built. Because the finishes come from different processes, they have to be approved together on one physical sample rather than matched from separate swatches, or the two surfaces will read slightly different under daylight.
Is the raised pull handle structural or decorative?
It is fixed into reinforcement inside the leaf, so it has to be settled before the leaf is pressed. Handle length, position and fixing centres go on the drawing together with the panel layout, because moving the handle afterwards means opening a finished face.
Can the panel proportions be changed for my opening?
They can, within the limits of the leaf height and the hardware. Send the opening size and the proportion you want, and the three fields are set on the elevation before production. A very tall leaf needs an internal subframe regardless of panel layout, so the two get decided at the same time.


