Door Design · JMR-2103

Mixed Metal and Wood Grain Entrance Door

Jmr-2103 divides the leaf into metal and wood-grain fields, so the entrance carries two materials at once without a visible joint line at the hand. Jmr-2103 is manufactured as a single door on a steel system with an aluminum trim. Nothing is cut until the opening is surveyed, and the powder-coated steel with a lacquered or wood-grain face is signed off against a sample.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Mixed Metal and Wood Grain Entrance Door

Why this design works

  • Metal and wood-grain fields in one leaf
  • Joint lines aligned with the panel grid
  • Trim detail from the Elegant Steel range

Design details

Style
Mixed-material
Material / system
Steel system with aluminum trim
Configuration
Single door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, mixed panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

Two Fields, One Joint, and Where It Lands

Dividing the leaf into a metal field and a wood-grain field creates exactly one joint, and that joint is a straight horizontal line across the door. Its height is the composition — a third up, at handle height, or high enough to read as a band. The one place it should never sit is exactly at the hand, because that is where the finish is touched most and where two different coatings wear at different rates.

The two fields also come from different processes, so they have to be approved together on one physical sample rather than matched from separate swatch cards. The join between them is where any mismatch shows first: a grain that is a shade warmer than the metal beside it looks intentional in isolation and wrong at the seam. Agreeing both surfaces on one panel is the only reliable way to catch that before production.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, mixed panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.

Image gallery

Frequently asked questions

Are the two materials different thicknesses?

The fields are set flush, so the face reads as one plane with a change of finish only.

Can the wood-grain field be repositioned?

Yes, the split line is set from your elevation drawing.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Related collections

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry