Door Design · J-2215
Textured Steel Door with Flush Lock System
J-2215 removes the lever entirely: a flush lock system sits inside the textured face, so the entrance presents an unbroken plane with hardware released only on operation. Each J-2215 is made to the project opening: 70 mm leaf, 90 mm frame, steel system with an aluminum trim. The powder-coated steel with a lacquered or wood-grain face can be matched to the existing facade before production.
70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.
Discuss This DesignWhy this design works
- Flush lock system, no surface lever
- Textured face runs unbroken past the lock
- Steel build with anti-drill cylinder
Design details
- Style
- Architectural flush
- Material / system
- Steel system with aluminum trim
- Configuration
- Single door
- Door leaf thickness
- 70 mm
- Frame depth
- 90 mm
- Maximum frame sizes by configuration
- Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
- Core filling
- Aluminum honeycomb or foam filling, selectable
- Glass
- None, textured panel
- Locking
- Multi-point lock with anti-drill cylinder
- Smart lock
- Smart lock compatible
A Flush Lock Removes the Lever, Not the Mechanism
The face is unbroken because the lock body is inside the leaf rather than on it. That means the leaf has to carry a pocket, and over a honeycomb core a pocket needs a reinforced cassette around it — so the lock case position is fixed at the drawing stage and cannot be moved once the leaf is built. On a door where the whole argument is the unbroken plane, that single decision is the one to get right first.
On site the consequence is about operation rather than appearance. A flush face gives no lever to pull, so the door is opened by the pull and closed against the closer, and the two have to be coordinated: too strong a closer on a face with nothing to grip makes the door feel heavy for the wrong reason. The keyway is then the only interruption in the plane, which is why its position is composed with the pull rather than left to the lock template.
Specification & ordering
Steel Entry Door Specifications and Ordering
Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.
Maximum Frame Sizes by Door Construction
Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.
| Door construction | Single leaf | Unequal double leaf | Equal double leaf |
|---|---|---|---|
| Steel Entry Doors | 1180 × 2500 mm | 1580 × 2500 mm | 2180 × 2500 mm |
These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.
Technical specification
- Door leaf
- 1.0 mm galvanized steel sheet
- Frame
- 2.0 mm galvanized steel
- Core
- Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
- Configuration
- Single or double leaf, with or without glass
- Glazing
- None, textured panel
- Finish
- Wood-grain transfer, powder coat or custom finish
Ordering & supply
- Minimum order quantity
- 1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
- Sample lead time
- 25 days
- Production lead time
- 30–45 days
- Container loading
- Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
- Factory inspection
- Third-party factory inspection welcome
- Trade terms
- FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
- Warranty
- 3 years on structure; 1 year on hardware and electronic lock components
Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.
Image gallery
Frequently asked questions
How is the door opened from outside?
A flush cylinder and a concealed pull release the latch; the leaf then swings on its hinges or pivot.
Can a smart lock be fitted?
Yes, the flush housing accepts a smart lock body on request.
Can this design be custom sized?
Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.
Which materials and finishes are available?
This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.
How do I specify this door for a project?
Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.
Related collections
Planning an entrance around this design?
Share your opening dimensions, finish preferences and configuration needs with our team.
Start an inquiry
Jmr-2003
JMR-2103
Jmr-2110