Door Design · Jmr-2110

Entrance Door with Horizontal Statement Pull

Jmr-2110 uses one long horizontal pull to set the proportion of the whole entrance, so a plain face gains a measured, architectural line at hand height. Built to order in steel system with aluminum trim, Jmr-2110 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Entrance Door with Horizontal Statement Pull

Why this design works

  • Full-width horizontal pull as the proportion line
  • Plain face, no panel divisions
  • Pull length scaled to the leaf width

Design details

Style
Statement modern
Material / system
Steel system with aluminum trim
Configuration
Single door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

A Horizontal Pull Sets the Leaf's Proportion

On a plain face, a long horizontal pull creates a second horizontal datum, and that datum is what gives the door its proportion. Sit it in the upper third and the leaf reads taller; sit it low and the door looks squat however tall it actually is. Its length is read as a fraction of the leaf width, so the bar is specified against the opening rather than picked from a standard size.

A bar that long also has leverage. The fixings are at both ends with the reinforcement spanning between them, and that span is built into the leaf before it is pressed. It is the reason the handle has to be chosen at the same time as the leaf rather than after the door arrives — a longer bar later means new fixing centres and a new backing, which is a rebuild rather than a swap.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.

Image gallery

Frequently asked questions

Can the pull span the full leaf?

Yes, the bar length is set from the leaf width, up to the full face.

Is a back-to-back pull available?

Yes, an internal matching bar can be fitted for double-sided operation.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Related collections

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry