Door Design · JMR-3670

Classic Armored Door with Ring Knockers

Jmr-3670 builds a traditional panel layout into an armored leaf and finishes it in deep black, with ring knockers that give the entrance its period reference. Built to order in steel system with aluminum trim, Jmr-3670 takes its 70 mm leaf and 90 mm frame from the opening survey rather than a stock size, with the powder-coated steel with a lacquered or wood-grain face approved on a physical sample.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Classic Armored Door with Ring Knockers

Why this design works

  • Classical panel layout, armored core
  • Ring knockers in a matched metal finish
  • Available as a single or double assembly

Design details

Style
Classical panel
Material / system
Steel system with aluminum trim
Configuration
Single or double door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1200 × 3000 mm; unequal double: 1600 × 3000 mm; equal double: 2200 × 3000 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, panelled face
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

Ring Knockers and the Panel Layout They Belong To

Ring knockers are a period reference, and they only read correctly against a panel layout that has a defined centre rail to hang them from. On a flat door they look like hardware dropped onto a surface; on this layout they sit in the field between two mouldings, which is where a knocker would have been on the timber door the design refers to. Their height follows the middle rail, not a standard door height.

Deep black changes how the panels read. The mouldings catch light along their edges while the recesses go fully dark, so the relief looks deeper than it measures — and any softness in a moulding edge, which would be invisible in a mid-tone, shows up in black as a highlight that looks like a paint defect. That is why the profile edges are checked before the finish goes on, and why black is the least forgiving colour in the collection to produce.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel-Core Armored Doors1200 × 3000 mm1600 × 3000 mm2200 × 3000 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, panelled face
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.

Image gallery

Frequently asked questions

Are the knockers functional?

They are working knockers with a strike plate, not applied ornament.

Can the panel mouldings be simplified?

Yes, moulding depth and count are set from your reference elevation.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry