Door Design · Jmr-3107

Full-Height Armored Door with Number Plaque

Jmr-3107 runs the leaf to full height and sets the house number into the face, so the entrance carries its own signage without a separate plate on the wall. Each Jmr-3107 is made to the project opening: 70 mm leaf, 90 mm frame, steel system with an aluminum trim. The powder-coated steel with a lacquered or wood-grain face can be matched to the existing facade before production.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Full-Height Armored Door with Number Plaque

Why this design works

  • Full-height leaf, no transom joint
  • House number integrated into the door face
  • Concealed hinges keep the reveal clean

Design details

Style
Armored minimal
Material / system
Steel system with aluminum trim
Configuration
Single door, full height
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1200 × 3000 mm; unequal double: 1600 × 3000 mm; equal double: 2200 × 3000 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

Setting the House Number Into the Leaf

A number cut into the face is a hole in the skin, so behind it there has to be something that keeps the core closed and stops water tracking into the leaf. That backing, and the exact digit positions, are set with the door: the digits are spaced to the leaf width and placed at a legible height, and none of it is drilled on site.

Because the leaf runs full height, there is no transom or rail to break the elevation, which leaves the number as the only element on the face. That makes its position relative to the pull and the lock a composition rather than an address detail — too close to the pull and the two collide, too high and it stops being readable from the gate. Full height also means the leaf is at the top of what the hinges are sized for, so the number's position does not affect structure, but the leaf weight does.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel-Core Armored Doors1200 × 3000 mm1600 × 3000 mm2200 × 3000 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size.

Image gallery

Frequently asked questions

Can the plaque carry a name as well as a number?

Yes, the plaque is machined to your text and finish before assembly.

Is a full-height leaf heavy to use?

The leaf runs on concealed heavy-duty hinges sized for the height, with an optional closer.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Related collections

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry