Door Design · J-2662

Unequal Double Steel Entrance Door with Arched Panels

J-2662 is an unequal double door: a wide main leaf that takes the handle and the lock, closed against a narrow secondary leaf. The two leaves share one panel rhythm — an arched head over a rectangular field on the main leaf, repeated at reduced width on the narrow leaf — so the pair reads as a single elevation rather than a door with a panel added beside it. The leaf is 90 mm in a steel system and the frame is closed with an aluminium trim line; both faces are finished in matte charcoal and every panel is solid.

90 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Unequal Double Steel Entrance Door with Arched Panels

Why this design works

  • Unequal leaf pair: wide main leaf, narrow secondary leaf
  • 90 mm steel leaf closed with an aluminium trim line
  • Arched recessed head carried across both leaves

Design details

Style
Arched panel
Material / system
Steel system with aluminum trim
Configuration
Unequal double leaf
Door leaf thickness
90 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panels
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

Why the Split Between the Two Leaves Decides the Whole Elevation

In an unequal pair the two leaves have to read as one door while carrying different widths. The arched head is drawn against the main leaf because that is where the eye lands; the narrow leaf then repeats the same arch at a reduced width. If the two heads are scaled independently the pair stops looking like a door and starts looking like a door with a side panel bolted on, which is why the alignment is settled leaf by leaf on a full-size elevation before any panel is formed.

The 90 mm leaf sets how much return depth the face has to work with. A recessed field needs a deep enough return to hold the stepped aluminium trim without the steel skin thinning at the corner of the panel, so the trim runs as one continuous band around the frame and turns into the panel edges instead of sitting proud of them. The panels are solid throughout and there is no glazing rebate, so the elevation is decided entirely by where the panel lines sit.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panels
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.

Image gallery

Frequently asked questions

What does unequal double leaf mean?

One wide leaf carries the handle and lock, and a narrower leaf closes against it. It lets a wide opening keep a full-size main leaf instead of splitting the width into two equal halves.

Can the split between the leaves be changed?

Yes. The proportion between the main leaf and the narrow leaf is set on the drawing to suit the opening width and where the hardware has to land.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry