Door Design · J-2015

Pressed-pattern steel entry door with horizontal dividing rails

J-2015 presses a repeating pattern into the steel face and separates it with horizontal rails, so the door reads as a composed elevation rather than a flat panel. Each J-2015 is made to the project opening: 70 mm leaf, 90 mm frame, steel system with an aluminum trim. The powder-coated steel with a lacquered or wood-grain face can be matched to the existing facade before production.

70 mm door leaf and 90 mm frame; final configuration and overall frame dimensions are confirmed on your project drawing. Multi-point lock with anti-drill cylinder, and a fingerprint lock can be fitted on request.

Discuss This Design
Pressed-pattern steel entry door with horizontal dividing rails

Why this design works

  • Repeating pressed pattern, no applied mouldings
  • Horizontal rails divide the leaf into readable bands
  • Pattern depth survives coating and cleaning

Design details

Style
Graphic modern
Material / system
Steel system with aluminum trim
Configuration
Single door
Door leaf thickness
70 mm
Frame depth
90 mm
Maximum frame sizes by configuration
Single: 1180 × 2500 mm; unequal double: 1580 × 2500 mm; equal double: 2180 × 2500 mm (overall frame; family limits)
Core filling
Aluminum honeycomb or foam filling, selectable
Glass
None, solid panel
Locking
Multi-point lock with anti-drill cylinder
Smart lock
Smart lock compatible

Horizontal Rails Set the Rhythm; the Press Sets the Scale

The horizontal rails are what the eye reads first, because they divide the leaf into bands. The pressed pattern is second: it sets the scale within each band. That order matters when the door is resized, because the rails can move and the pattern repeat cannot — the repeat has to divide into the band height, or the top and bottom bands end with a partial row that looks like a mistake rather than a detail.

Depth is the other constraint. The pattern is pressed into a 1.0 mm galvanised skin over a honeycomb or foam core, so the relief is bounded by how much the thin skin will take before it telegraphs through to the inside face. A bolder pattern is therefore a heavier skin, not a deeper press, and that changes the leaf weight the hinges are sized against.

Specification & ordering

Steel Entry Door Specifications and Ordering

Steel entry doors are quoted by sheet thickness, frame build and core, because those three numbers decide the weight, the security performance and the freight cost per door.

Maximum Frame Sizes by Door Construction

Width × height in millimetres, measured to the outside of the frame. Arched heights include the arch. Confirm the selected model, clear passage and any additional sidelights on the project drawing.

Door constructionSingle leafUnequal double leafEqual double leaf
Steel Entry Doors1180 × 2500 mm1580 × 2500 mm2180 × 2500 mm

These are construction-family limits, not confirmation that every pictured design is available in every arrangement. Pivot doors are supplied as a single leaf only; unequal and equal double pivot doors are not offered. Fixed sidelights are separate from the opening leaf.

Technical specification

Door leaf
1.0 mm galvanized steel sheet
Frame
2.0 mm galvanized steel
Core
Aluminum honeycomb or water-based polyurethane foam as standard; fire-rated MGO board for project orders
Configuration
Single or double leaf, with or without glass
Glazing
None, solid panel
Finish
Wood-grain transfer, powder coat or custom finish

Ordering & supply

Minimum order quantity
1 door for seven series. Steel Entry and Fire Rated: 1 door for custom orders, 5 doors for project orders.
Sample lead time
25 days
Production lead time
30–45 days
Container loading
Approx. 300 doors per 40HQ (2050 × 950 mm single leaf)
Factory inspection
Third-party factory inspection welcome
Trade terms
FOB Shanghai / Ningbo; Yiwu warehouse handover; DDP available
Warranty
3 years on structure; 1 year on hardware and electronic lock components

Figures above are our standard build. Where a project falls outside them, we quote a custom variant against your drawings rather than build to the nearest catalogue size. Full series specification: Steel Entry Door.

Image gallery

Frequently asked questions

Can the pattern be scaled?

Yes, the repeat can be enlarged or reduced to suit the door width.

Does the pressed pattern weaken the leaf?

No, the pattern is formed into the steel skin over a continuous core, so structural performance is unchanged.

Can this design be custom sized?

Yes. Every JMR Habitat door is built to the opening dimensions on your survey or drawing, including non-standard widths and heights.

Which materials and finishes are available?

This design is built in Steel system with aluminum trim. Powder-coated colours, wood-look and metallic finishes are available, and a physical sample can be approved before production.

How do I specify this door for a project?

Send the opening dimensions, a drawing or reference image and your finish direction through the inquiry form; the team returns a specification and drawing for approval.

Planning an entrance around this design?

Share your opening dimensions, finish preferences and configuration needs with our team.

Start an inquiry